The Innokin iTaste VV/ VW MVP v2
The iTaste MVP lets you adjust the voltages / wattage, and comes with one of the most powerful batteries to be featured within a device,which can also be used as a power station to charge up other devices, such as an iPad or mobile phone.
The MPV works like a power train and will not fail to impress even the most experienced vaper.
This device is made by the world’s most innovative electronic cigarette manufacturer Innokin.
The unit has a, full metal body and is built with the quality and consistency which is to be expected from this manufacturer.
What do I get with this Kit
1x iTaste MVP v2
1x iClear 30
1x Universal USB cable
1x Transparent box with instructional manual
How does it work?
Switching the iYaste MVP ON or Off:
Quickly clicking the % button three times will turn the battery on or off.
Once the battery is on, holding down the % button will activate the battery.
There are three main buttons on the iTaste MVP:
% button (main button on the front)
P button (right hand side small button on the side of the MVP)
U button (left hands side small button on the side of the MVP)
All the functions of the MVP can be activated by using these three buttons to change the settings in a single step, without the use of a menu system.
Your chosen mode will be displayed on the LED screen.
P button: VW
U button: VV
Variable Voltage Mode :
Press the U button for 3 seconds to enter variable voltage mode.
The screen will show you the Puff counter first followed by the last adjustment (The last adjustment may be a voltage or wattage setting), after showing the last adjustment, the iTaste MVP will enter variable voltage mode. Voltage can be adjusted from 3.3 to 5.0 volts in 0.1 volt increments by pressing the U button.
Variable Wattage Mode :
Press the P button for 3 seconds to enter variable wattage mode.
The screen will show you the Puff counter first followed by the last adjustment (The last adjustment may be a voltage or wattage setting), after showing the last adjustment, the iTaste MVP will enter variable wattage mode.
Wattage can be adjusted from 6.0 to 11 wattsin 0.5 watt increments by pressing the “P” button.
Ohms Meter & Battery Level Indicator & Puff Counter:
Hold both the P and U buttons simultaneously for 2 seconds.
The screen will show a series of readings, the first being the resistance of the attached atomiser / Tank ( Rx.x ,
for example R2.2), the second being the battery voltage, the third being the number of puffs since the device was last turned off and the fourth being the last set voltage or wattage.
If no load is attached the display with show “NON”.
If you wish to check the number of puffs taken since the iTaste MVP was last turned off, you can also hold either the P or the U button to display the Puff Counter which will be followed by the display of the current mode (VV mode or VW mode).
In this state, you can also adjust the voltage or wattage by pressing the P or U button.
LED Light Blinking Mode:
The LED light will blink in different colours to indicate the current battery voltage
1. Red LED light = battery voltage is lower than 3.61V
2. Yellow LED light = battery voltage between 3.61V and 3.75V
3. Green LED light = battery voltage is more than 3.75 V
4. Red LED will keep blinking for 8 seconds when battery capacity is lower than 3.3V and the device will turn off automatically.
5. Red LED light will stay on for 5 seconds when a load short circuit is detected or the current of the coil is more than 3.5A, then no vapor will be produced.
6. If you take a drag for longer 10 seconds, the battery will stop it’s output, the RED light will blink 10 times, and the iTaste MVP won’t continue to work until you
press the power button again.
Name: iTaste MVP V2
Colour: Machined Black
Size: 23mm x 41mm x 107mm
Display: Blue LED Display
Operation Voltage: 3.3V – 5.0V
Operation Wattage: 6.0W – 11.0W
Battary Capacity: 2600mAh
Voltage can be adjusted from 3.3 – 5.0 Volts in 0 .1 volt increments.
Wattage can be adjusted from 6.0 – 11.0 W in 0 .5 watts increments.
The iTaste MVP V2 can read the resistance of your Atomiser/ Tank
The Puff Counter records the number of draws that you have taken.
Press the P or U button for 1 second to check the amount of draws you have had.
The Puff Counter will be cleared when the device is turned off.
Battery Level Indicator:
The iTaste MVP battery capacity is displayed by colour via the LED lights in the button
Green = Fully Charged
Yellow = Half Discharged
Red = In need of charging
Short Circuit / Atomiser Protection.
The iTaste MVP will automatically turn off when the battery is discharged.
Large battery capacity:
The iTaste MVP has a built-in 2600 mAh polymer Li-Ion rechargeable battery.
Compatible with most atomisers with a 510 or eGo connector.
ON/OFF battery switch
10 seconds cut off
If the button is held down for 10 seconds or longer, the iTaste MVP will shut itself off
until the button is released and pressed again.
The iTaste MVP uses a built in Micro USB Port.
You can recharge it with a Micro USB cable.
You can also use it as a pass-through, using it whilst it is charging.
Remembers last set voltage or wattage:
Built-in 3 digit display :
The LED 3 digit display shows Ohms, Voltage / Wattage setting, number of puffs taken
since last time the battery was turned off.
Portable power source (charger) for electronic products:
The iTaste can be used to charge up other mobile devices
Turn ON the small switch located on the bottom of the iTaste MVP .
Connect the cable into the USB OUTPUT port (DC 5V , maximum output current 0.5A ,the 3 most popular power connectors for iPhone / iPods), Mini USB (Motorola/Blackberry), a Micro USB (Motorola / Nokia / LG / Samsung).
Turn OFF the small switch when you have finished charged your electronic device.
Please Note: Never leave batteries unattended whilst charging and never charge over night whilst you are in bed.
Only use the USB charger supplied with the device.
We are proud to announce that we are an official Innokin Reseller.
iTaste MVP wrap
Wraps for the iTaste MVP v2 Want to change the look of your MVP V2? Look no further, with these Vynil wraps you can change the look in seconds,...
Aspire Vivi nova BDC
Aspire Vivi Nova BDC with Metal Body The Aspire BDC (Bottom Dual Coil) Vivi Nova tank is designed with the user in mind. It has a 3.5ml glass tank...
DCT / Carto tank
DCT / Carto Tank in Black (Smoked) A DCT is a combination of a dual coil cartomiser and a tank system So it has the advantages of both a dual coil...
Evod New bottom coiled clearomiser tank system. Main features: Bottom coil clearomiser 1.6ml liquid tank capacity. Working with ego threaded...
Puritank BCG Glassomiser
Puritank BCG Glassomiser The Puritank BCG, is a bottom coil atomiser tank system that has got a lot in common with the Kanger Protank, though...
No Reviews Posted Yet - be the first!(write review)